WB4101 Process Videos: Thick Casting Slurry Prep

 

 

Polymer Innovations, Inc. (PII) and its personnel have acquired decades of experience in tape casting formulation and ceramic processing, and gathered enormous experience regarding WB4101 and its capabilities and performance characteristics. In this series of videos we outline the procedure for processing slurry to cast thick tape using our TK004 & TK005 Thickening Additives. These additives will allow you to cast tape which is several hundred microns thick if used properly.


 

High Shear Slurry Processing Video, Part 1 :

 

 

This video shows the technique used for adding WB4101 Binder to a pre-batched mixture of De-Ionized Water, Powder, DF001 & DF002 Defoamers and PL005 Plasticizer using a High Shear Mixer. In addition, a detailed presentation on Water Based THICK Tape Casting can be found HERE.

 

 

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

 

 

 

 

Click Here to Proceed to the Next Video in the Series -->